Scraper Blades

	Quick Links (to scraper blades below):
	Channel Blade Shield Blade Triangular Blade Oval Blade Compact Triangular Blade Profile Blade Window Blade	German Siding Blade Boomerang Blade Clapboard Blade Big Dawg Blade Tungsten Carbide Reversible Scraper Blade Stainless Steel Reversible Scraper Blade - 2 Pack

High Quality Swedish-Steel Blades:  These scraper blades are made from hardened Swedish steel and designed to remove thick multiple layers of paint and varnish. If you happen to run into a nail or metal, these blades can easily be re-sharpened on a wet-wheel or a 1750rpm grinder. It is not recommended to use a 3400 rpm grinder. A faster grinder will heat the blade up too much making it loose the hardening. This may result in wearing down the blade very quickly.

Tungsten carbide steel blades:  Tungsten carbide blade scrapers have been used by professionals in Europe for a long time but are rarely available in the USA. You will most likely not find these scrapers in regular paint stores (unless they purchased them wholesale from us). Our two sided slightly curved tungsten carbide blade is extremely durable. Use this scraper blade with the two hand scraper for finishing surfaces before priming and painting or varnishing. In many situations, this scraper replaces a sander.

Stainless steel scraper blades.  This blade is for our economy scraper and can be sharpened the same way as the hardened steel blades.

Other Products You Can Feel Good About:

Channel Blade   Blade for the channels along the side of a window jamb were the sash runs up and down. Usually this area is painted causing windows to be painted shut. Made from hardened Swedish steel. Blade dimension: 2 ¾” x 1 ¼”.

# 1006
Price: $29.00

Shield Blade   Curved blade with 90 degree notch for removing paint from molding, doors and window trim. Made from hardened Swedish steel. Blade dimension: 2 ½” x 1 ¼”.

# 1005
Price: $29.00

Triangular Blade   Blade for scraping flat surfaces. Special price for bulk purchase of scrapers.

Single # 1200-7
Price: $16.00

5-Pack # 1200-5P
Special Price: $55.00

Oval Blade   The blade has slightly curved sides for any flat or semi-flat surface.

Single # 1200-69
Price: $29.00

Profile Blade   Specially-designed blade for mouldings and windows.

Single # 1200-8
Price: $29.00

Window Blade   Specially-designed blade for mouldings and windows. This can be easily sharpened on a slow grinder or a wet-wheel. You can sharpen the blades with a good quality file too.

Single # 1002
Price: $29.00

German Siding Blade   Specially-designed blade for mouldings and windows. This can be easily sharpened on a slow grinder or a wet-wheel. You can sharpen the blades with a good quality file too.

Single # 1003
Price: $23.00

Boomerang Blade   Designed for convex and concave surfaces

Single # 1200-22
Price: $29.00

3 Pack# 1200-223P
Price: $65.00

Clapboard Blade   Designed for convex and concave surfaces

Single # 1200-10
Price: $29.00

Big Dawg Blade   Large Parallelogram scraper blade for removing massive amounts of paint from clapboard siding and other flat or semi flat wood surfaces. Each side measure 3". Specially designed for fitting the edge between clapboard that is slightly less than 90 degree's. The cutting edges are slightly curved on each side for better effectiveness. This blade is also large enough to be used for any custom shape. You can grind this down to accommodate any molding shape.

Single # 12051
Price: $29.00

Tungsten Carbide Reversible Scraper Blade   Made in Sweden by SANDVIK.

# 665150
Price: $16.00

Stainless Steel Reversible Scraper Blade - 2 Pack  

# 661565
Price: $10.00