 |
|
|
|
|
|
|
| What makes a good scraper?
- One important factor is how the blade is attached to the handle.
If the blade is moving just slightly, this will make the scraper significantly
less effective. You need a scraper with a blade that does not flex.
Our scrapers have blades that are attached with a strong bolt on top
of a flat washer and a split washer preventing the blade from flexing.
- The thickness of the blade is also important. A thicker blade
will reduce the flex and transfer the power directly to the sharp edge,
making it much more effective. Our scraper
blades are at least twice the thickness of most other brands on
the market.
- A long handle means better leverage. Extra long handle will
increase the power, you can apply onto the painted or varnished surface.
These scrapers have 12” long handle allowing great leverage for scraping.
- The angle of the sharp edge is also important. You may have
noticed if you have ever used a chisel, that it was very sharp when
it was brand new but after it was sharpened it became significantly
less effective. This problem appears when you sharpen a scraper as well.
If you change the angle of the edge during sharpening, you will loose
some of the scrapers effectiveness. You must maintain the same angle.
Because our scraper blades are so much thicker it is easier to maintain
the correct angle. A sharpening guide or blade
sharpening jig of some sort can be very helpful to keep the correct
angle.
- A sharp blade is also very important. Allowing the scraper
to get very dull will result in great effort to bring the sharpness
back. It is simply much easier to sharpen a blade that is slightly dull
than extremely dull. Sharpen your scraper regularly.
How do you use these scrapers?
You need both hands with this hand tool. Position the scraper handle
parallel to the painted surface or closer. Grip one hand on the rear of
the scraper handle and apply pressure with your other hand close to the
blade. Holding the scraper with only one hand is not as effective.
Click to Enlarge Images Below |
|
|
NEW!
Stainless Steel Scraper with Blade Kit New
Scraper with soft grip and Stainless Steel blade kit. 6 various
shapes for paint removing on intricate details. Sharpen with regular
file, wet wheel or slow grinder.
|
| |
| # 6600
Price: $29.00 |
|
|
|
 |
|
|
NEW!
Channel Scraper For removing paint and varnish
along the channels along the side of a window jamb were the sash
run up and down. Usually this are is painted causing windows to
be painted shut. Blade
made from hardened Swedish steel. Blade dimension: 2 ¾”
x 1 ¼”. Long ergonomic handle (handle may be red or
black).
|
| |
| # 120016
Price: $39.00 |
|
|
|
 |
|
|
NEW!
Shield Scraper Curved blade with 90 degree notch for
removing paint from molding, doors and window trim. Replaceable
blade made from
hardened Swedish steel. Blade dimension: 2 ½” x 1 ¼”.
Long ergonomic handle (handle may be red or black).
|
| |
| # 120015
Price: $39.00 |
|
|
|
 |
|
|
2 1/2"
Stainless Steel Blade Scraper 2 1/2" stainless
steel blade. Ergonomic design optimizes leverage. Stainless steel
blade is reversible.
Made in Sweden. |
| |
| # 661665
Price: $9.95 |
|
| # 6616652P Save big on a 2-Pack.
Price: $17.00 |
|
|
|
 |
|
|
Triangular
Scraper Professional quality scraper with a long ergonomic
handle (handle may be red or black). Length 12 5/8”. This scraper
has a thick blade (that gives you great leverage), a long handle,
and slightly curved sharp edges that reduce the risk of gouging.
Great for flat and other surfaces. Sharpen this on a water cooled
slow turning stone for best result. Avoid grinders for sharpening.
Three-edge scraper with one edge slightly convex. 12" handle. Blade
is 3" Extra blades are
available here. Complete with handle and blade. Blade made of laser
cut hardened Swedish steel. |
| |
| # 1200-3
Price: $29.00 |
|
| # 1200-32P Save big on a 2-Pack.
Price: $49.00 |
|
|
|
 |
|
|
Contractors'
Triangular Scraper Kit Kit includes: Five Triangular
scrapers. One five pack of Triangular blades. |
| |
| # 1200-CT
Price: $139.00 |
|
|
|
|
|
|
Oval Scraper
Oval scrapers with two diameter size round tips for those
classic grooved trim. The blade has slightly curved sides for any
flat or semi-flat surface. Blade
made from hardened Swedish steel. Price includes long ergonomic
handle (handle may be red or black). |
| |
| # 1200-70
Price: $39.00 |
|
| |
|
|
|
 |
|
|
Profiled
Scraper Professional quality scraper with a long ergonomic
handle (handle may be red or black). Length 12 5/8”. This scraper
has 6 different shapes in the same blade. Excellent for various
trim, contoured edges etc. You will find it very helpful to have
a variety of shapes in one blade when working on doors, windows
and trim. Sharpen this on a water cooled slow turning stone for
best result. Avoid grinders for sharpening. Extra blades
are available here. Complete with handle and blade. Blade made of
laser cut hardened Swedish steel. |
| |
| # 1200-4
Price: $39.00 |
|
| |
|
|
|
 |
|
|
Boomerang
Scraper Professional quality scraper with a long ergonomic
handle (handle may be red or black). Length 12 5/8”. This scraper
has two convex sides and one concave side. This is excellent for
rounded edges and posts. This shape is also very helpful when working
on shutters. The tips reaches into tight areas. Sharpen this on
a water cooled slow turning stone for best result. Avoid grinders
for sharpening. Extra blades
are available here. Complete with handle and blade. Blade made of
laser cut hardened Swedish steel. |
| |
| # 1200-21
Price: $34.00 |
|
| # 1200-212P Save big on a 2-Pack.
Price: $59.50 |
|
|
|
 |
|
|
Clapboard
Scraper This scraper allows you to scrape the edge
under the clapboard at the same time you scrape the flat surface
right below. You have a sharp point on one corner of the blade.
The edges are slightly curved to accommodate uneven surfaces you
may encounter on old clapboards. Tested by various longtime painters
with excellent feedback. Blade
made from hardened Swedish steel. Price includes long ergonomic
handle (handle may be red or black). |
| |
| # 1200-9
Price: $39.00 |
|
| |
|
|
|
 |
|
|
Big
Dawg If you have strong arms and want to remove massive
amounts of paint. The "Big Dawg" parallelogram square scraper is
the scraper for you! For removing large volume of paint off of clapboard
siding and other flat or semi flat wood surfaces. Each side measures
3". Specially designed for fitting the edge between clapboard that
is slightly less than 90 degree's. The cutting edges are slightly
curved on each side for better effectiveness. The scraper blade
is made from hardened Swedish steel and has enough material for
you to create any custom shape you may need - simply grind the blade
into your custom shape after tracing the contour onto the blade.
Make sure you maintain approximately 45 degree angle on the sharp
edge. Price includes long ergonomic handle (handle may be red or
black). |
| |
| # 1205
Price: $39.00 |
|
|
|
 |
|
|
Window Scraper
Professional quality scraper with a long ergonomic handle
(handle may be red or black). Length 12 5/8". This scraper has 4
different shapes in the same blade. Excellent for windows, contoured
edges etc. You will find it very helpful to have a variety of shapes
in one blade when working on your windows and trim. Extra blades
are available. Complete with handle and blade. Blade made of laser
cut hardened Swedish steel. This can be easily sharpened on a slow
grinder or a wet-wheel. You can sharpen the blades with a good quality
file too. |
| |
| # 1200-12
Price: $39.00 |
|
|
|
 |
|
|
German
Siding Scraper The blade has a curved edge that is
perfect for German siding. Professional quality scraper with a long
ergonomic handle (handle may be red or black). Length 12 5/8". This
scraper has 3 different shapes in the same blade. You will find
it helpful to have 3 shapes in one blade when working on German
siding. Extra blades
are available. Complete with handle and blade. Blade made of laser
cut hardened Swedish steel. This can be easily sharpened on a slow
grinder or a wet-wheel. You can sharpen the blades with a good quality
file too. |
| |
| # 1200-13
Price: $39.00 |
|
|
|
 |
|
| |
|
 |
|
|
1 1/4"
German Siding Tungsten Carbide Scraper Heavy duty
steel handle with brazed on tungsten carbide blade. The blade has
a curved edge that is perfect for German siding. Convex height is
3/16" |
| |
| # 1200-27
Price: $39.50 |
|
|
|
 |
|
|
2"
Tungsten Carbide Scraper with Vacuum Attachment Stay
clean while you scrape! Simply connect to your vacuum cleaner and
enjoy dust free scraping. Tungsten carbide blade. Attaches to 1¼"
hose. Use a reducer on a 2" vacuum hose. |
| |
| # 1200-VS
Price: $34.00 |
|
|
|
 |
|
|
2 1/2"
Stainless Steel Blade Scraper 2 1/2" stainless
steel blade. Ergonomic design optimizes leverage. Stainless steel
blade is reversible.
Made in Sweden. |
| |
| # 661665
Price: $9.95 |
|
| # 6616652P Save big on a 2-Pack.
Price: $17.00 |
|
|
|
|
|
|
1"
Tungsten Carbide Cove Scraper Heavy duty steel handle
with brazed on tungsten carbide blade. The blade has a raised crown
edge. Convex height is 3/16" |
| |
| # 1200-24
Price: $39.50 |
|
|
|
 |
|
|
Pocket
Scraper Pocket scraper with holster and four contoured
blades. Ergonomic soft-grip handle. Supplied with a tungsten carbide
blade fitted and three blades in the cartridge. For windows, trim,
doors and carving details. |
| |
| # 661401
Price: $34.95 |
|
|
|
 |
The
Silent Paint Remover™
